Complementing the Woodstock™ brush collection, we are pleased to make available for the first time a series of brushes we have named the “Disc” brush. The “Disc” brush
is available in two materials: Nylon and type 304 stainless.
   Nylon is tough, yet pliable, and non-deteriorating. For years we have been the source for a variety of nylon brushes, including the recent Woodstock™ series. This type of brush material is unequaled when used on soft
soot deposits as they remove large volumes of soot without streaking. They can also overlap on smaller or square flues, eliminating the need for excess brush inventories.
   Our type 304 stainless steel bristle “Disc” brush has features not found in any other brush used for the removal of hard flue deposits. First–less than 2” in thickness, this brush boasts hundreds more bristles than any 8” to 10” full size wire brush. You will immediately notice the feel of the sweeping action as the dense bristles sweep away the

toughest deposits. Second–this brush, coupled with a rotating handle or connected to our Hammer Head™ steel flex rods and a 2” electric drill, can power buff a flue interior to never before clean luster finish.
COUPLERS FOR “DISC” BRUSHES
   Both our “Disc” brushes connect to your chimney rod by either the Brass Cup & Clearing Wheel, or the Cup & Screw. To use the Cup & Screw: screw Cup onto the rod’s male end, then place the Screw through the disc and into
the threaded Cup. The Cup & Wheel allows you to sweep from the bottom up–the Wheel contacts the rear wall and rides up the flue and on through offsets.
   The Cup & Wheel feature lets you store a whole set in the space of one brush. The low brush profile means radical bend navigating.